You have no items in your shopping cart.

Product was successfully added to your shopping cart.
ACOPOWER 10 Amp Commander MPPT Solar Charge Controller w/ MT-50

ACOPOWER 10 Amp Commander MPPT Solar Charge Controller w/ MT-50


(In stock)


ACOPOWER 20 Amp MPPT Solar Charge Controller Regulator


ACOPOWER 20 Amp Commander MPPT Solar Charge Controller w/ MT-50

ACOPOWER 10 Amp Commander MPPT Solar Charge Controller w/ MT-50

100 1 100 0

Availability: In stock


Quick Overview

  • Innovative MPPT technology
  • Peak conversion efficiency of 98%
  • High tracking efficiency up to 99%
  • Field upgradable firmware
  • Temperature compensation



Innovative MPPT technology 
Peak conversion efficiency of 98% 
High tracking efficiency up to 99% 
Several seconds tracking speed 
Die-cast aluminum design and nature cooling 
Energy statistics function 
RS485 ports with MODBUS communication protocol 
Optional PC monitoring software and remote meter for real-time monitoring and battery management parameter setting 
Field upgradable firmware 

Electronic Protections: 
PV short circuit protection 
PV overvoltage alarm protection 
PV current limiting protection 
PV reverse polarity protection 
Battery overcharge protection 
Battery over discharge protection 
Battery reverse polarity protection 
Load overload protection 
Load short circuit protection 
Overheating protection 


· Automatic identify  the controller, and display the type, model and relevant parameter data 
·Large-screen multifunction LCD  displays all the operational data and system working status  in digital, graphic and textual forms  
·With six navigation function keys, the  operation is direct, convenient and rapid 
·Real-time energy statistics recording 
·Both data and data flowing on the same lead ,no need for  external power  
·Real-time monitoring and acoustic alarm of failure information of the controller 
·Longer communication distance based on RS485

More powerful function Via MT50 
·Diversified load control modes : manual, light ON/OFF, Light ON+ Timer, Time Control  
·Battery type selection: Gel, sealed, flooded and USER type 
·Real-time monitor  
·Programmable parameters  
·Energy display function

Additional Information

Warranty Policies No
Charge Mode No
Charge Battery Type No
System Voltage No
Rated Charge Current No
Rated Discharge Current No
Max. PV Open Circuit Voltage No
Max. PV Input Power No
Peak Conversion Efficiency No
Light Control No
Timer Control No
LCD Display No
Power Terminals No
Operating Temperature No
Enclosure Type No
Dimension No
  1. Best one I have used yet, excellent display and User programmable features seen in high end units. review by Tony on 6/15/2018

    EP Solar
    I have been in Renewable energy business for decades, actual designed a few solar controllers working in Engineering, stunned how good the MT-50) display viewing & the MPPT algorithm was spot on. I swept the 100watt Renogy panel using PV Sweeper produced MPPT point of 5.8Amps, the 1215BN MPPT was spot on at 5.8amps! The USER mode allows adjusting all settings, as we use deep cycle AGM batteries which are particular to temp issues and overcharging, tailoring the voltage boost time, float and boot voltages allows for better life time. Excellent feature EP Solar! With the remote temp sensor taped to the battery the charge mv/'c temp compensation curve offsets and lowers the charge voltage when its hot, preventing gassing. The boost timer adjustment allows you to minimize boost time, some controller are max out 2 full hours (not adjustable), but this model allows you to adjust it to 30 minutes if your in a float mode all the time. Bought a second one today with RTS temp sensor and MT-50 display to replace a PWM controller for my Cargo trailer and its 50watt panel.

Write Your Own Review

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars

Product Questions

No questions yet. Be the first to ask the question!

We Recommend