Step 1: Battery wiring:before connecting the battery, measure the battery normal voltage.
Connect Battery positive(+) and negative(-) to the charger controller positive(+) and negative(-)
Confirm the connection correct and then turn on the power.
Step 2: Load Wiring: Connect DC load positive(+)and negative(-) to the charger controller positive(+) and negative(-), connect carefully to avoid short circuit, and input of the inverter can be connected to the charger controller Load terminal or directly connected to the battery according to the actual situation.
Step 3: Solar Panel Wiring
Solar Panel(s) may be used if the open circuit voltage does not exceed the maximum solar input rating. The sololar module(s) nominal voltage must be equal to or greater than the nominal battery voltage . Connect solar panel positive(+) and negative(-) the charger controller positive(+) and negative(-)
Step 4: Accessories(option)
Install Remote Meter if required. Refer to the instructions provided